Location：

HOME > Products > Gear Pumps > Multicomponents

1610 series gear pumps

Sealing : Lip seals and liquid barrier (16KA)
Rotation speed : From 10 to 200 RPM, depending on the product involved
Standard rotation : Clockwise rotation (A)
Output pressure : Max. 100 bars
Input/Output : 2 holes Ø 6mm on the rear of the pump. Delivered with connecting block G1/4" (0.05 cc/rev and 0.1 cc/rev = G1/8")
Driving shaft diameter : Ø12mm with a 4mm key
Drive shaft height : H=40mm

Available outputs：
00.05cc/rev、0.1cc/rev、0.3cc/rev 、0.6 cc/rev、1.2cc/rev、1.8cc/rev、2.4cc/rev、3.0cc/rev

Order

Datasheet

Details

Application fields
Silicones, glues, elastomers, polyurethanes, various resins, various hardeners, pigments, epoxy, polyesters, etc…

Strong points
• All parts are in tempered stainless steal
• Reduction of “dead zones” allowing for a better flushing
• New sealing technology combining lip seals and liquid barrier
• Sealing options quickly interchangeable
• Strong, coated drive shaft, held in place with 2 bearings and a axial thrust
• Centering pins making pump assembly easier and increasing its accuracy

Available options
• (T2) Entirely treated with ADLC (not for 0.05 cc/rev)
• (H51) Stand for drive shaft height H=51mm
• (Z) Counterclockwise rotation
• (AZ) Clockwise and counterclockwise rotation
• (AB38) Connecting block G3/8"

Back

Related products

1610 series gear pumps

11165 series gear pumps

2611 series gear pumps

1611 series gear pumps

Navigation

Chongqing Paco Sci. & Tech. Development Co., Ltd.

Mobile：86-13594000884

Phone：86-23-68795340

E-Mail：yu@chinacqpaco.com

Address： No. 27-31, No. 67, Xisheng Road, Chenjiaqiao Street, Shapingba District, Chongqing, China